Yale Air Hoists Accessories on American Crane & Equipment Corp.

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


Crane and Hoist Equipment and Components by Type > Yale > Yale Air Hoists Accessories


	Yale Air Hoists Accessories
	Click on a category to drill down.


		Yale Filter Lubricator Unit (8) Air hoists must have a supply of clean, lubricated air for their operation. A filter and lubricator must be installed in the air supply line, as close as practical to the hoist. The recommended operating air pressure for all capacities of YALE® air hoists is 90 psi. When air line pressure exceeds 115 psi, it is required that a pressure regulator be provided in the supply line to maintain proper pressure.




		Yale Bullard Hooks All hoists are furnished as standard with hooks equipped with hook latches. Bullard Hooks with rugged cast swing gate locking member that provides greater assurance of load containment are available at additional cost. Spark resistant Bullard Hooks are not available.




		Yale Redundant Support Hoist suspension redundant support for Series 2200 hoist is available for additional cost. This redundant support features a cable that inserts through the hoist frame and around the initial support.




		Yale Pendant Throttle Conversion Kit Kits for converting the pull cord Model YAL Air Hoist to pendant throttle operation has standard 6-foot pendant hose assembly. Longer hose assemblies available. Order Catalog No. 2269. Shipping weight is 8 pounds.




		Yale Air Hose Assemblies (9) Assembly requires Catalog Number for both hose and fittings.




		Yale Air Hose Trolleys For use with YAL and KALC Air Hoists) These trolleys are used to support air hose and are installed on the same track as a hoist. The hose clamp swivels and fits 5/8 to 1-1/2 inch diameter hoses.




		Yale Recoil Air Hose with Fitting (7) For application where air hose trolleys with looped hose is impractical; coil type self-storing hose is recommended.




		Yale Wire Ropes Festoon Systems for Air Supply Hose (3) System includes: 2 end clamp assemblies; 1 hardware kit consisting of 2 eye-bolts, 5 clamps and 1 ball stop; Intermediate carriers - see specified quantity in last column of chart below; Nylon covered wire rope per required length.




		Yale Chain Containers