Budgit Air Hoist Accessories on American Crane & Equipment Corp.

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


Crane and Hoist Equipment and Components by Type > Budgit > Budgit Air Hoist Accessories


	Budgit Air Hoist Accessories
	Click on a category to drill down.


		Budgit Air Hoist Filter Lubricator Units (8) Air hoists must have a supply of clean, lubricated air for their operation. A filter and lubricator must be installed in the air supply line, as close as practical to the hoist. The recommended operating air pressure for all capacities of BUDGIT® air hoists is 90 psig. When air line pressure exceeds 115 psig, it is required that a pressure regulator be provided in the supply line to maintain proper pressure.




		Budgit Bullard Hooks All hoists are furnished as standard with hooks equipped with hook latches. Bullard Hooks with rugged cast swing gate locking member that provides greater assurance of load containment are available at additional cost. Spark resistant Bullard Hooks are not available.




		Budgit Redundant Support Hoist suspension redundant support for Series 2200 hoist is available for additional cost. This redundant support features a cable that inserts through the hoist frame and around the initial support.




		Budgit Pendant Throttle Conversion Kit Kits for converting the pull cord Series 2200 BUDGIT® Air Hoist to pendant throttle operation has standard 6-foot pendant hose assembly. Longer hose assemblies available. Order Catalog No. 2269. Shipping weight is 8 pounds.




		Budgit Air Hoist Chain Containers




		Budgit Air Supply Hose and Fittings (8)




		Budgit Air Hose Trolleys (For use with Series 2200 and Series 6000 Air Hoists) These trolleys are used to support air hose and are installed on the same track as a hoist. Hose clamp swivels and will fit 5/8 to 1-1/2 inch diameter hoses.




		Budgit Recoil Air Hose with Fitting (7) For application where air hose trolleys with looped hose is impractical; coil type self-storing hose is recommended.




		Budgit Wire Rope Festoon Systems for Air Supply Hose (3) Hose System (from 0.91” to 1.25” O.D.) System include: 2 end clamp assemblies; 1 hardware kit consisting of 2 eye-bolts, 5 clamps and 1 ball stop; Intermediate carriers - see specified quantity in last column of chart below; Nylon covered wire rope per required length. NOTE: Festooning hose and connectors are not included in the system.