Installation:
Install cable connectors on approved junction boxes and insert cables through the rubber bushings.
Tighten the connector nut firmly. The connector should be installed at the bottom of the junction box for outdoor applications. Heat shrink cable fittings are available for multiple cable installations.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Product Code

Availability

Weight

Material

Length

Height

Width

Condition*

N/A PREORDER N/A 9 lb N/A Galvanized Steel N/A 8 in N/A 10 in N/A 4 in N/A new
N/A PREORDER N/A 12.19 lb N/A Galvanized Steel N/A 10 in N/A 12 in N/A 5 in N/A new
N/A PREORDER N/A 0.20 lb N/A Galvanized Steel N/A N/A N/A N/A new
N/A PREORDER N/A 0.40 lb N/A Galvanized Steel N/A N/A N/A N/A new
N/A PREORDER N/A 9 lb N/A Stainless Steel N/A N/A N/A N/A new
N/A PREORDER N/A 7 lb N/A Stainless Steel N/A N/A N/A N/A new
N/A PREORDER N/A 0.20 lb N/A Stainless Steel N/A N/A N/A N/A new
N/A PREORDER N/A 0.40 lb N/A Stainless Steel N/A N/A N/A N/A new
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1