• Logo Munck Image

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

  • Logo Munck Image

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

  • Logo Munck Image

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

  • Product Photo Budgit Push Type Top Running

    Capacity 1/2 - 5 tons/Spans to 36 feet

    Available options include: Spark Resistant & Corrosion Resistant Features - Note additional cost may apply.

    Crane bridge kits contain all the parts needed to build top running single girder crane bridges, except for the bridge beam, cross shaft (when required) and trolley stop angles.

    Push type kits contain:

    • End trucks (1 pair)
    • Complete attachment hardware
    Material to be purchased locally:
    • American standard section I-beam or wide flange that is at least 9 1/4" longer than the bridge span
    • Four trolley stop angles must be cut to size and attached to bridge beam
    • For hand geared bridges only: 1" diameter cross shaft to match span.

  • Product Photo Budgit Hand Geared Top Running

    Capacity 1/2 - 5 tons/Spans to 36 feet

    Available options include: Spark Resistant & Corrosion Resistant Features - Note additional cost may apply.

    Crane bridge kits contain all the parts needed to build top running single girder crane bridges, except for the bridge beam, cross shaft (when required) and trolley stop angles.

    Hand geared kits contain:

    • End trucks (1 pair) complete with driving pinion and attachment hardware
    • Cross shaft support (quantity based upon span)
    • Drive couplings (quantity based upon span)
    • Chain wheel and chain guide
    • 36 foot length of hand chain with open connecting link
    Material to be purchased locally:
    • American standard section I-beam or wide flange that is at least 9 1/4" longer than the bridge span
    • Four trolley stop angles must be cut to size and attached to bridge beam
    • For hand geared bridges only: 1" diameter cross shaft to match span.

  • Product Photo Budgit Motor Driven Top Running

    Available options include: Spark Resistant & Corrosion Resistant Features - Note additional cost may apply.

  • Product Image Yale_Cable_King_TB_and_TR_Series_Top_Running_Trolley_Hoists

    The Yale Cable King line of top-running trolleys comes packaged two ways: the TR and the TB Series. Both combine the outstanding features of the Cable King electric wire rope hoist. From the low-headroom TR trolley to the versatile TB Trolley, both are ideal for a multitude of applications where long-term, dependable service is needed. With hoist motors to 30 Hp, the Cable King delivers the faster lifting speeds and heavy-duty service required for today's industrial operations. Available in a variety of gages, this top-running trolley hoist comes standard with:

    • Flux Vector hoist control on motors 25 Hp and larger
    • Single, two-speed or inverter controls on motors under 25Hp
    • Weston screw-and-disc type load brake through 20HP
    • AC-disc-type motor brake
    • Upper and lower geared limit switch
    • Upper plugging limit switch
    • Rubber bumpers
    • Rail sweeps
    • Conforms with ASME B30.2
    • Available for Class 'D' and CMAA 70 specifications

  • Product Image WorldSeries-DoubleGirderTro

    The Shaw-Box World Series wire rope hoist was created for the world market and combines over 130 years of experience with the latest in manufacturing and materials technology, rigid design standards and the best quality components available to create a feature-filled, rugged, easily maintained hoist.

    The World-Series hoist is metric capacity rated, low headroom, heavy-duty, built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing long life in heavy applications with the higher lifting speeds and precise positioning control demanded by industry worldwide.

  • Product Photo Budgit Push Type Top Running

    Capacity 1/2 - 5 tons/Spans to 36 feet

    Available options include: Spark Resistant & Corrosion Resistant Features - Note additional cost may apply.

    Crane bridge kits contain all the parts needed to build top running single girder crane bridges, except for the bridge beam, cross shaft (when required) and trolley stop angles.

    Push type kits contain:

    • End trucks (1 pair)
    • Complete attachment hardware
    Material to be purchased locally:
    • American standard section I-beam or wide flange that is at least 9 1/4" longer than the bridge span
    • Four trolley stop angles must be cut to size and attached to bridge beam
    • For hand geared bridges only: 1" diameter cross shaft to match span.

  • Product Photo Budgit Hand Geared Top Running

    Capacity 1/2 - 5 tons/Spans to 36 feet

    Available options include: Spark Resistant & Corrosion Resistant Features - Note additional cost may apply.

    Crane bridge kits contain all the parts needed to build top running single girder crane bridges, except for the bridge beam, cross shaft (when required) and trolley stop angles.

    Hand geared kits contain:

    • End trucks (1 pair) complete with driving pinion and attachment hardware
    • Cross shaft support (quantity based upon span)
    • Drive couplings (quantity based upon span)
    • Chain wheel and chain guide
    • 36 foot length of hand chain with open connecting link
    Material to be purchased locally:
    • American standard section I-beam or wide flange that is at least 9 1/4" longer than the bridge span
    • Four trolley stop angles must be cut to size and attached to bridge beam
    • For hand geared bridges only: 1" diameter cross shaft to match span.

  • Product Photo Budgit Motor Driven Top Running

    Available options include: Spark Resistant & Corrosion Resistant Features - Note additional cost may apply.

  • Icon Top-Running-Double-Girder-Crane-with-Wire-Rope-Hoist

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

    DOWNLOADS
    Specifications for Double Girder Crane with Wire Rope Hoists
    Technical Data for Double Girder Crane with Wire Rope Hoists
    CMAA Buyer Guide

    Spans available up to 100 feet.

  • Icon ACECO_Double_Girder_Crane_Wire_Rope_Hoist_Standard_Crane

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

    DOWNLOADS
    Specifications for Double Girder Crane with Wire Rope Hoists
    Technical Data for Double Girder Crane with Wire Rope Hoists
    CMAA Buyer Guide
    Spans available up to 100 feet.

  • Icon Single_Girder_Under_Running_Underhung_Crane

    American Crane & Equipment Corporation is recognized as a leading supplier of Industrial Cranes. American Crane's Industrial Cranes are installed at many locations throughout the world, handling a wide variety of materials. All American Crane & Equipment Corporation cranes are manufactured to rigid quality standards and factory tested prior to shipment. American Crane's pre-engineered industrial cranes are designed to meet the requirement of the Crane Manufacturers Association of America (CMAA) in duty class "A" through "F".

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

    All Hoists are built in strict accordance with the CMAA Buyer Guide * Wire rope has 5:1 minimum safety factor as required by OSHA 1910.179(h)(2)(1) *Bumpers sized in accordance with OSHA 1910.179(e)(2) & (3) *Rail sweeps provided in accordance with OSHA 1910.179(e)(4)

  • Product Image singlegirdercrane

    Electric Top Running Single Girder Crane, complete with low headroom monorail trolley and electric wire rope hoist and controls.

    American Crane can provide pre-engineered industrial cranes and a full line of custom cranes to meet each customer's specific application. For support for your specific application please consult the CMAA Buyer Guide and/or contact an American Crane sales representative.

    DOWNLOADS
    Specifications for American Crane Single Girder Crane Top Running and Under Running with Wire Rope Hoist
    Technical Data For American Crane Single Girder Crane Top Running and Under Running with Wire Rope Hoists
    CMAA Buyer Guide