| Items |
 GLC250-8-11.5 Gorbel® 11 Feet (ft) 6 Inch (in) Runway Length, 6 Feet (ft) Maximum Hanger Spacing (L1), and 250 Pound (lb) Steel Ceiling Mounted Workstation Crane Price $2,658.10
|
GLCS250-8-11.5 Gorbel® 11 Feet (ft) 6 Inch (in) Runway Length, 20 Feet (ft) Maximum Hanger Spacing (L1), and 250 Pound (lb) Steel Ceiling Mounted Workstation Crane Price $3,334.50
|
GLC250-8-23 Gorbel® 23 Feet (ft) Runway Length, 6 Feet (ft) Maximum Hanger Spacing (L1), and 250 Pound (lb) Steel Ceiling Mounted Workstation Crane Price $3,739.20
|
GLCS250-8-23 Gorbel® 23 Feet (ft) Runway Length, 20 Feet (ft) Maximum Hanger Spacing (L1), and 250 Pound (lb) Steel Ceiling Mounted Workstation Crane Price $4,378.55
|
GLCSL250-8-28 Gorbel® 28 Feet (ft) Runway Length, 25 Feet (ft) Maximum Hanger Spacing (L1), and 250 Pound (lb) Steel Ceiling Mounted Workstation Crane Price $5,730.40
|
|||||
| Manufacturer | Gorbel® | |||||||||
| Brand | Gorbel® | |||||||||
| Support Centers | GLC | GLCS | GLC | GLCS | GLCS | |||||
| Bridge Length | 8 ft | |||||||||
| Capacity | 250 lb | |||||||||
| Runway Length | 11 ft 6 in. | 11 ft 6 in. | 23 ft | 23 ft | 28 ft | |||||
| Maximum Hanger Spacing (L1) | 6 ft | 20 ft | 6 ft | 20 ft | 25 ft | |||||
| Weight | 144 lb | 198 lb | 219 lb | 310 lb | 569 lb | |||||
| Material | Steel | |||||||||
| Mounting Style | Ceiling | |||||||||
| Product Category | Ceiling Mounted Workstation Cranes | |||||||||
| Note | Sway bracing is required (not included in prices) to resist against damaging lateral loads. | |||||||||
| Price Includes |
Bridge, runways, hoist trolley, end trucks, end stops, festoon gliders (festoon trolleys for runway lengths > 63’), 4 conductor #14 flat cable, festoon clamps, festoon tow arms (where applicable), festoon stack-up section, splice assemblies, and standard hanger brackets with threaded rod and hardware (up to the total number of hangers specified in the Work Station Crane Dimensional Brochure). Sway bracing (by others) is required (not included in the prices). Center line of splice joints must be within 8” of hanger center line. |
Bridge, runways, hoist trolley, end trucks, end stops, festoon gliders (festoon trolleys for runway lengths > 63’), 4 conductor #14 flat cable, festoon clamps, festoon tow arms (where applicable), festoon stack-up section, splice assemblies, and standard hanger brackets with threaded rod and hardware (up to the total number of hangers specified in the Work Station Crane Dimensional Brochure). Sway bracing (by others) is required (not included in the prices). Center line of splice joints must be within 48” of hanger center line. |
Bridge, runways, hoist trolley, end trucks, end stops, festoon gliders (festoon trolleys for runway lengths > 63’), 4 conductor #14 flat cable, festoon clamps, festoon tow arms (where applicable), festoon stack-up section, splice assemblies, and standard hanger brackets with threaded rod and hardware (up to the total number of hangers specified in the Work Station Crane Dimensional Brochure). Sway bracing (by others) is required (not included in the prices). Center line of splice joints must be within 8” of hanger center line. |
Bridge, runways, hoist trolley, end trucks, end stops, festoon gliders (festoon trolleys for runway lengths > 63’), 4 conductor #14 flat cable, festoon clamps, festoon tow arms (where applicable), festoon stack-up section, splice assemblies, and standard hanger brackets with threaded rod and hardware (up to the total number of hangers specified in the Work Station Crane Dimensional Brochure). Sway bracing (by others) is required (not included in the prices). Center line of splice joints must be within 48” of hanger center line. |
Bridge, runways, hoist trolley, end trucks, end stops, festoon gliders (festoon trolleys for runway lengths > 63’), 4 conductor #14 flat cable, festoon clamps, festoon tow arms (where applicable), festoon stack-up section, splice assemblies, and standard hanger brackets with threaded rod and hardware (up to the total number of hangers specified in the Work Station Crane Dimensional Brochure). Sway bracing (by others) is required (not included in the prices). Center line of splice joints must be within 48” of hanger center line. |
|||||
| Product Hierarchy | ||||||||||
|
|
||||||||||
