Customers can make their own WB100 Series Jib Crane using our high quality components. Buy an I-Beam locally and do your own assembly.

The Wall Bracket kits consist of a top wall bracket, bottom wall bracket and a beam bracket. The two (2) wall bracket fittings have bronze thrust washers and bronze bushings with grease fittings. The top wall bracket and beam bracket include a tie rod clevis.

The kits are available for one-half (1/2) ton, one (1) ton, two (2) ton, three (3) ton and five (5) ton capacity WB100 Series Jib Cranes, for spans ranging from 8' to 30'. A tie rod (not included) is used with these fittings.

Standard: Non-painted
The hardware kit consists of hardware required to connect (a) the lower bracket and the end of beam bracket to the beam and (b) the hex nuts and lock washers to attach the tie rod to the clevis assemblies.

We are not responsible for deviation from above capacity and span recommendations, variance from our recommended limitations between brackets, overloading or incorrect installation of crane.
List prices are F.O.B. Fishers, New York or Pell City, Alabama and are subject to change without prior notice.