• Can be used on hot rolled structural steel plates
  • Can be used to lift stainless steel plates or plates with harden surfaces due to cold rolling
  • Lift plates from horizontal to vertical positions and vice versa through 180 degrees
  • Clamp has serrated teeth and will mark plate
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Product Code

Description

Price

Working Load Limit

Plate (in.)

HG0.5 N/A 694830, Cm Hg High Grip Clamps $691.20 N/A 1100 (lbs) N/A 0-3/8
HG1 N/A 694831, Cm Hg High Grip Clamps $831.60 N/A 2200 (lbs) N/A 0-5/8
HG2 N/A 694832, Cm Hg High Grip Clamps $1,157.76 N/A 4400 (lbs) N/A 0-3/4
HG3 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly QUOTE N/A 6600 (lbs) N/A 0-3/4
HG4 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly QUOTE N/A 8800 (lbs) N/A 0-3/4
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1