• Body of clamp is welded construction
  • Can be used to lift plate from horizontal to vertical position and vice versa
  • Standard clamp is fitted with a hook ring that can be replaced with a short length of chain and master link
  • Clamp jaws and pads are manufactured from high tensile steel
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 

Product Code

Description

Working Load Limit

Plate (in.)

CZ920.5 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 1100 (lbs) N/A 0-5/8
CZ921.5 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 3300 (lbs) N/A 0-3/4
CZ922 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 4400 (lbs) N/A 0-1 1/4
CZ923 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 6600 (lbs) N/A 0-1 1/4
CZ924 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 8800 (lbs) N/A 0-1 1/4
CZ924/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 8800 (lbs) N/A 1 1/4 - 2 3/8
CZ926 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 13200 (lbs) N/A 0-2
CZ926/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 13200 (lbs) N/A 2-4
CZ928 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 17600 (lbs) N/A 0-2
CZ928/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 17600 (lbs) N/A 2-4
CZ9210 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 22000 (lbs) N/A 0-2
CZ9210/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 22000 (lbs) N/A 2-4
CZ9212 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 26400 (lbs) N/A 0-2
CZ9212/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 26400 (lbs) N/A 2-4
CZ9215 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 33000 (lbs) N/A 0-2
CZ9215/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 33000 (lbs) N/A 2-4
CZ9220 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 44000 (lbs) N/A 0-2-1/2
CZ9220/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 44000 (lbs) N/A 2 1/2 - 5 1/8
CZ9230 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 66000 (lbs) N/A 0 - 2 1/2
CZ9230/L N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 66000 (lbs) N/A 2 1/2 - 5 1/8
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1