• Designed to lift and transport structural steel beams in horizontal position
  • Clamp designed with the hook as near as possible to the center of gravity of the beam
  • Long beams should be lifted using 2 clamps attached to opposite beam flanges
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Product Code

Description

Working Load Limit

Flange (in.)

TTR0.75 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 1600 (lbs) N/A 1/2-5/8
TTR1.5 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 3300 (lbs) N/A 1/4-1
TTR3 N/A DO NOT LIFT LESS THAN 20% OF WORKING LOAD LIMIT ON ALL CLAMPS. Lifts plates vertical to horizontal and vice versa. WARNING Improper use of lifting clamps may result in loss of load and personal injury To avoid injury: • Do inspect clamps and equipment before use. • Do not exceed working load limit of clamp. • Use clamps only if authorized and properly N/A 6600 (lbs) N/A 1/4-1
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1