(866) 912-2890
parts@americancrane.com
M-F | 8am-4:30pm (EST)
GENUINE REPLACEMENT PARTS ASSISTANCE
Munck Replacement Parts Finder
Identify replacement components by hoist family, assembly and drawing callout, then request a quote from American Crane.
Three ways to find your Munck part
Option 1 β Quick Part Search: Know the part number or part name? Search across all Munck parts lists.
Option 2 β Guided Parts Finder: Not sure of the part number? Select your hoist family, model and assembly below. Review the part descriptions and request a quote; our Parts Department will verify the correct variation.
Option 3 β Contact Us: Need help finding the right Munck replacement part? Contact our Parts Department or email parts@americancrane.com.
Choose a replacement type to narrow the manufacturer's parts list. The limit-switch assembly and its internal components are not interchangeable.
IDENTIFICATION ASSISTANT
Find the correct rope guide
These questions narrow the Munck 223/224 catalog. They do not confirm fit without the equipment nameplate and configuration.
Check the hoist's manual, rope specification or equipment records for its nominal diameter. If those are unavailable, a qualified person can measure the stopped, secured rope with a caliper across the outer crowns, never between strand valleys. Wear can affect the reading.
Measured diameter alone will not automatically select a nominal rope size or a replacement part.
Look at the outer strands as the rope hangs vertically. The strand spiral resembles the diagonal stroke of the letters below. This describes the rope lay, not the rope guide's handedness.
The wire rope's lay does not tell us whether the rope guide itself is right- or left-hand.
Check for a readable manufacturer part number stamped, molded, or printed on the existing guide. The Munck catalog identifies guide handedness by part number β not by the wire rope's lay direction.
13 mm: reference 19 is listed as right-hand. 8, 9 and 11 mm: reference 20 is listed as right-hand; reference 21 as left-hand. These are catalog references, not a reliable way to infer the hand from a photo alone.
Open original Munck 223/224 drawingIf you cannot find the marking, photograph the guide from the side, its drum position, and the hoist nameplate. Keep clear of moving equipment and suspended loads. American Crane must verify guide orientation and equipment configuration before ordering.
Manufacturer reference drawings
The year describes the drawing revision, not necessarily your hoist manufacture date. Compare available illustrations; American Crane must confirm the correct version for your equipment.
3111D1 / 3211D1 β Gearbox
3111D1 / 3211D1 β Motor 6275-52 and Brake ZFB40H
3111D1 / 3211D1 β Housing and Rope Drum
3101D1 / 3201D1 β Housing and Drum
3101D1 / 3201D1 β Gearbox
3101D1 / 3201D1 β Motor 6275-51
2852/2855 β Gearbox
2852/2855 β Housing and Rope Drum
2852/2855 β Motor 6266
2852/2855 β Motor 6275-62
2852/2855 β Motor 6275-61
2851 family β Gearbox
2851 family β Brake
2851 family β Frame and Drum
2841/43/44/45 β Gearbox
2841/43/44/45 β Housing and Drum
2841/43/44/45 β Motor 6266
2841/43/44/45 β Motor 6275-62
2841/43/44/45 β Motor 6275-61
2841/43/44/45 β Micro Speed 144-38
2831 β Gearbox, Original Manufacturer Drawing
2831 β Housing and Drum, Original Manufacturer Drawing
2831 β Motor 6266-55, Original Manufacturer Drawing
2831 β Motor 6275-58, Original Manufacturer Drawing
2831 β Motor 6275-57, Original Manufacturer Drawing
2822 B/E β Original Gearbox Drawing
2822 B/E β Original Housing and Drum Drawing
2822 B/E β Original Motor Drawing
2822 B/E β Original Motor Drawing
2822 B/E β Original Motor Drawing
2822 B/E β Original Motor Drawing
2811 Gearbox β Original Manufacturer Drawing
2811 6263 Motor β Original Manufacturer Drawing
2811 6275-54 Motor β Original Manufacturer Drawing
2811 6275-53 Motor β Original Manufacturer Drawing
2811 Housing and Drum β Original Manufacturer Drawing
2801 gearbox β original drawing
2801 motor 6275-51 β original drawing
2801 motor LM-100L β original drawing
2801 housing and drum β original drawing
227/228 β March 1968 drawing
Shared 225/226/228 β August 1971 drawing
225 reference Β· September 1964
226 reference Β· September 1964
Drawing A Β· November 1976
Drawing B Β· September 1964
Micro-speed motor reference
Munck 223/224 β March 1968 manufacturer reference
223 micro-speed machinery β January 1965 reference
This FMR 3β5 drawing describes a separate micro-speed design. Do not assume it matches the 144-42B parts list without identification by American Crane.
Contact American Crane with your equipment model and serial number so we can identify the correct assembly illustration.
Source: Munck Cranes SPL-2004-E catalog, PDF pages 10β11. These are reference drawings, not confirmed equipment matches.
Callout numbers are checked against the printed legends of these drawings only. The correct revision and the specific part variation must still be confirmed.
Replacement parts
Callout key: Some descriptions cover more than one manufacturer configuration. Submit a quote request with your hoist model and serial number so American Crane can verify the correct replacement.
Select "View drawing reference" to inspect the assembly position. Request a quote by part description; American Crane will confirm the correct manufacturer part number and compatibility.
Request a parts quote
Choose a part above and enter the identification details. An ACECO representative will confirm compatibility, availability and price.
Choose a part and provide equipment identification to help American Crane review your request.
